Supermicro Supero 6037R-E1R16N User Manual Download Page 65

Page: 65 / 75

Chapter 7: BIOS

7-23

7-22

UPER

TORAGE

YSTEM 6037R-E1R16N User's Manual

TPM State

Select Enabled to enable TPM security settings to improve data integrity and
network security. The options are

Disabled

and Enabled.

Pending Operation:

This item displays the status of a pending operation.

Current Status Information:

This item displays the information regarding the

current TPM status.

TPM Enable Status

This item displays the status of TPM Support to indicate if TPM is currently
enabled or disabled.

TPM Active Status

This item displays the status of TPM Support to indicate if TPM is currently ac-
tive or deactivated.

TPM Owner Status

This item displays the status of TPM Ownership.



Intel TXT (LT-SX) Configuration

Intel TXT (LT-SX) Hardware Support

This feature indicates if the following hardware components support the Intel
Trusted Execution Technology.

CPU

: TXT (Trusted Execution Technology) Feature

Chipset

: TXT (Trusted Execution Technology) Feature

Intel TXT (LT-SX) Configuration

This feature displays the following TXT configuration setting.

TXT (LT-SX) Support:

This item indicated if the Intel TXT support is enabled

or disabled.

Intel TXT (LT-SX) Dependencies

This feature displays the features that need to be enabled for the Intel Trusted
Execution Technology to work properly in the system.

VT-d Support

: Intel Virtualization Technology with Direct I/O support

VT Support

: Intel Virtualization Technology support

TPM Support

: Trusted Platform support

TPM State

: Trusted Platform state



Intel ME Subsystem Configuration

This feature displays the following ME Subsystem Configuration settings.

•

ME BIOS Interface Version

•

ME Version

iSCSI

: This item displays the following iSCSI information:

iSCSI Initiation Name

This item displays the name of the iSCSI Initiator, which

is a unique name used in the world.

Main Configuration Page

: This item displays the information regarding the main

iSCSI Configuration page.

7-4 Event Logs

Use this feature to configure Event Log settings.

Summary of Contents for Supero 6037R-E1R16N












































































Search results

Summary of Contents for Supero 6037R-E1R16N

Reviews:

Related manuals for Supero 6037R-E1R16N

Brands by name

Popular brands

Supermicro Supero 6037R-E1R16N, User Manual

Search results

Summary of Contents for Supero 6037R-E1R16N

Reviews:

Related manuals for Supero 6037R-E1R16N

Brands by name

Popular brands