SuperiorFireplaces.us.com
126871-01B
28
TROUBLESHOOTING
Continued
POSSIBLE CAUSE
1. Residues from manufactur-
ing processes
1. Turning control knob to HI
position when burner is cold
2. Air in gas line
3. Air passageways on fi re-
place blocked
4. Dirty or partially clogged
burner orifi ce
1. When heated, vapors from
furniture polish, wax, carpet
cleaners, etc. may turn into
white powder residue
1. Metal expanding while
heating or contracting while
cooling
REMEDY
1. Problem will stop after a few
hours of operation
1. Turn control knob to LO
position and let warm up
for a minute
2. Operate burner until air is
removed from line. Have
gas line checked by local
propane/LP gas company
3. Observe minimum installa-
tion clearances
(see
Pages
10 through 14
)
4. Clean burner
(see Cleaning
and Maintenance,
Page 25
)
or replace burner orifi ce
1. Turn heater off when us-
ing furniture polish, wax,
carpet cleaners, or similar
products
1. This is normal with most
fi replaces. If noise is ex-
cessive, contact qualifi ed
service person
OBSERVED PROBLEM
Slight smoke or odor during
initial operation
Fireplace produces a whis-
tling noise when burner is lit
White powder residue form-
ing within burner box or on
adjacent walls or furniture
Fireplace produces a clicking/
ticking noise just after burner
is lit or shut off
All manuals and user guides at all-guides.com
