Sun Oracle 4540 - Phaser Copystation, Service Manual, Page: 9 / 264

Contents ix
▼ To Replace the Front Indicator Board (FRU) 3-28
▼ To Replace a Hard Drive (CRU) 3-31
3.9.4 Replacing a Solid-State Drive (Sun Fire X4540 CRU) 3–35
3.9.4.1 SSD Restrictions 3–36
▼ To Replace an SSD 3-36
3.9.5 Replacing a Power Supply (CRU) 3–40
▼ To Access the Third Power Supply Bay 3-41
▼
To Remove a Power Supply (CRU) 3-43
▼
To Install a Power Supply 3-44
▼ To Replace a Battery (CRU) 3-45
▼ To Replace a CPU (FRU) 3-49
▼ To Replace the GRASP Board (X4500) (FRU) 3-58
▼
To Remove Memory Modules (DIMMs) (CRU) 3-61
▼
To Install Memory Modules (DIMMs) (CRU) 3-64
▼ To Install a PCI-X or PCIe Card (FRU) 3-65
▼ To Install the System Enclosure (FRU) 3-67
3.9.6 Replacing the System Controller (FRU) 3–68
▼
To Remove the System Controller (CRU) 3-70
▼
To Install the System Controller (CRU) 3-73
A. System Specifications A–1
B. BIOS POST Codes B–1
B.1 Introduction to Power-On Self-Test (POST) B–1
B.2 How to Load Optimal Default Settings During BIOS/POST B–2
B.3 How BIOS POST Memory Testing Works B–2
B.4 Redirecting Console Output B–3
B.5 Changing POST Options B–4
B.6 POST Codes B–6