Sun Oracle 4540 - Phaser Copystation, Service Manual, Page: 193 / 264

Chapter 3 Maintaining the Sun Fire X4500 and X4540 Servers 3-73
6. Loosen the two captive screws (with plastic green caps) under the system
controller handle. See
FIGURE 3-32
.
FIGURE 3-32
Loosening Captive Screws and Removing the Cover
7. Remove the system controller cover.
Push the system controller cover toward the rear and lift it off the chassis.
▼
To Install the System Controller (CRU)
TABLE 3-21
lists the qualified part numbers for this component. These part numbers
are subject to change over time. For an updated list of components, see the following
web site:
http://sunsolve.sun.com/handbook_pub/Systems/