Sun Oracle 4540 - Phaser Copystation, Service Manual, Page: 20 / 264

1-6 Sun Fire X4500/X4540 Server Service Manual • May 2010
1.3 Exterior Features, Controls, and
Indicators
This section shows, lists, and describes the features and the controls and indicators
on the front and rear panels of the Sun Fire X4500/X4540 server.
Note –
For a quick and concise description of these features refer to the service label
located on the hard drive access cover.
This section contains the following procedures and information:
■
Section 1.3.1, “Front Panel” on page 1-7
■
Section 1.3.2, “Front Panel Controls and Indicators” on page 1-7
■
Section 1.3.3, “Rear Panel (X4500)” on page 1-8
■
Section 1.3.4, “Rear Panel (X4540)” on page 1-11
■
Section 1.3.5, “Component Locations (X4500)” on page 1-13
PCIe I/O Three low-profile x8 PCIe slots.
Other I/O • Four USB 2.0 ports
• One VGA video port (D-15 connector on controller)
• Compact Flash card slot
Power • 1500 W DC max output per power supply, two bays, 1+1 redundancy,
hot-swappable.
• 1000 Watts max input power (3412 BTU/h =Maximum air flow is 200
CFM maximum air flow.
• 5 Amps max operating current @ 220 VAC (198 VAC to 264 VAC
range), 50 to 60 Hz.
Fans • Five fan modules; also additional fans in each power supply.
• Cooling is front-to-back forced air. Hot swappable, Variable speed,
• 7500 R.P.M. max, Top loading, Fault/OK LEDs,1.8A/18W,
SATAconnector.
• The SP software controls the fan speed and detects fan failure.
Operation terminates if a fan tray is removed.
Note - Do not operate the system with a fan removed for more than 60
seconds
TABLE 1-2
Summary of Features (X4540)
Feature or
Component
Sun Fire X4540 Server