Sun Oracle 4540 - Phaser Copystation, Service Manual, Page: 152 / 264

3-32 Sun Fire X4500/X4540 Server Service Manual • May 2010
*—See Sun Fire X4500-to-X4540 Migration User’s Guide (820-6559).
For a list of compatible SSDs, see “Replacing a Solid-State Drive (Sun Fire X4540
CRU)” on page 3-35 .
Note –
Before removing a drive, have the replacement drive ready to be installed.
For supported solid-state drives and their part numbers, see “Replacing a Solid-State
Drive (Sun Fire X4540 CRU)” on page 35 .
Caution – To avoid overheating the server, if the server is powered on, do not leave
a disk drive out for longer than 60 seconds at a time. Remove and replace only one
disk drive at a time. Replace the disk drive access cover as soon as the service tasks
are completed. Before removing a drive, have the replacement drive ready to be
installed.
Note – Early fan trays had a blue LED that was not activated. Later versions of the
fan trays have only a green and amber LED.
1. Remove the drives access cover.
See “To Remove the Drives Access Cover” on page 3-13 .
2. Identify the drive to be removed by checking its LEDs.
If the middle LED is on (amber), the drive is faulty and should be replaced.
TABLE 3-11
Disk Drives for the X4540 Server
Disk Drive Part Number
Seagate 250GB/7200RPM, SATA 3.5” drive (X4540) #541-1468,
XRA-ST1CH-250G7KZ (X-option)
Seagate 250GB/7200RPM, SATA, 3.5” (X4540) #541-3678,
XRA-ST1CH-250G7KZ (X-option)
Seagate 500GB, SATA, 3.5” (X4540) #541-3679
Seagate 1TB SATA, 3.5” (X4540) #541-3730
Hitachi 500GB/7200RPM, SATA, 3.5” (X4540) #541-3050,
XRA-ST1CH-500G7KZ (X-option)
Hitachi 1TB/7200RPM, SATA, 3.5” (X4500, X4540) #540-7507,
XRA-ST1CH-1T7K
Hitachi 2TB/7200RPM, SATA, 3.5” (X4500, X4540) #541-4241