Sun Microsystems Sun Fire B1600 Administration, Administration Manual

Page: 215 / 402

Chapter 4 Command-Line Reference 4-17
Example
In this example, the show history command lists the contents of the command
history buffer:
The
!
command repeats commands from the Execution command history buffer
when you are in Normal Exec or Privileged Exec Mode, and commands from the
Configuration command history buffer when you are in any of the configuration
modes. In this example, the
!2
command repeats the second command in the
Execution history buffer (
config
).
4.3.1.5 reload
Use this command to restart the system.
Note – When the system is restarted, it always runs the Power-On Self-Test. It also
retains all configuration information stored in non-volatile memory by the
copy
running-config startup-config
command.
Default Setting
None
Console# show history
Execution command history:
2 config
1 show history
Configuration command history:
4 interface vlan 1
3 exit
2 interface vlan 1
1 end
Console#
Console# !2
Console#config
Console(config)#