Sun Microsystems Sun Fire B1600 Administration, Administration Manual

Page: 253 / 402

Chapter 4 Command-Line Reference 4-55
4.3.5.1 snmp-server community
Use this command to define the community access string for the Simple Network
Management Protocol. Use the
no
form to remove the specified community string.
Syntax
snmp-server community
string [
ro
|
rw
]
no snmp-server community
string
■
string – Community string that acts like a password and permits access to the
SNMP protocol. (Maximum length: 32 characters, case sensitive; maximum
number of strings: 5)
■
ro
– Specifies read-only access. Authorized management stations are only able
to retrieve MIB objects.
■
rw
– Specifies read/write access. Authorized management stations are able to
both retrieve and modify MIB objects.
Default Setting
■
public
- with read-only access.
■
private
- with read/write access.
Command Mode
Global Configuration
snmp-server host
Specifies the recipient of an SNMP notification
operation GC 4-57
snmp-server enable
traps
Enables the device to send SNMP traps (SNMP
notifications) GC 4-59
show snmp
Displays the status of SNMP communications NE,
PE 4-60
TABLE 4-10
SNMP Commands
Command Function Mode Page