Sun Microsystems Sun Fire B1600 Administration, Administration Manual

Page: 336 / 402

4-138 Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003
Example
4.3.14 IGMP Snooping Commands
This switch uses IGMP (Internet Group Management Protocol) to query for any
attached hosts that want to receive a specific multicast service. It identifies the ports
containing hosts requesting a service and sends data out to those ports only. It then
propagates the service request up to any neighboring multicast switch/router to
ensure that it continues to receive the multicast service.
Console# show bridge-ext
Max support vlan numbers: 255
Max support vlan ID: 4094
Extended multicast filtering services: No
Static entry individual port: Yes
VLAN learning: IVL
Configurable PVID tagging: Yes
Local VLAN capable: Yes
Traffic classes: Enabled
Global GVRP status: Enabled
GMRP: Disabled
Console#
TABLE 4-19
IGMP Snooping Commands
Command Function Mode Page
Basic IGMP Commands
ip igmp snooping
Enables IGMP snooping GC 4-139
ip igmp snooping
vlan static
Adds an interface as a member of a multicast group GC 4-140
ip igmp snooping
version
Configures the IGMP version for snooping GC 4-141
show ip igmp
snooping
Shows the IGMP snooping configuration PE 4-142
show bridge
multicast
Shows the IGMP snooping MAC multicast list PE 4-143
IGMP Querier Commands
ip igmp snooping
querier
Allows this device to act as the querier for IGMP
snooping GC 4-144
ip igmp snooping
query-count
Configures the query count GC 4-144