Sun Microsystems Sun Fire B1600 Administration, Administration Manual

Page: 306 / 402

4-108 Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003
The minimum value is the higher of 4 or [(max-age / 2) + 1].
Default Setting
15 seconds
Command Mode
Global Configuration
Command Usage
This command sets the maximum time (in seconds) the root device will wait
before changing states (that is, discarding to learning to forwarding). This delay is
required because every device must receive information about topology changes
before it starts to forward frames. In addition, each port needs time to listen for
conflicting information that would make it return to a discarding state; otherwise,
temporary data loops might result.
Example
4.3.11.4 spanning-tree hello-time
Use this command to configure the spanning tree bridge hello time globally for this
switch. Use the
no
form to restore the default.
Syntax
spanning-tree hello-time
time
no spanning-tree hello-time
time – Time in seconds. (Range: 1-10 seconds)
The maximum value is the lower of 10 or [(max-age / 2) -1].
Console(config)# spanning-tree forward-time 20
Console(config)#