Chapter 4
Command-Line Reference
4-31
Command Mode
Global Configuration
Command Usage
■
You cannot set a null password. You have to enter a password to change the
command mode from Normal Exec to Privileged Exec with the
enable
command (page
4-13
).
■
There is no need to specify encrypted passwords on the command line. The
option 7 is used internally by the switch at system bootup time to enable the
switch to read any encrypted passwords stored in the configuration file.
Example
Related Commands
enable
(
4-13
)
4.3.3.4
ip http port
Use this command to specify the TCP port number used by the Web browser
interface. Use the
no
form to use the default port.
Syntax
ip http port
port-number
no ip http port
port-number
– The TCP port to be used by the browser interface. (Range: 1 to
65,535)
Default Setting
80
Console(config)#
enable password level 15 0 admin
Console(config)#
Summary of Contents for Sun Fire B1600 Administration
