Sun Microsystems Netra ct, Installation Manual

Page: 138 / 174

120 Netra ct Server Installation Guide • September 2002
2. Check the
/etc/remote
file for the appropriate line.
To connect to the TTY A or COM 1 port on the workstation, check for this line:
3. Type
tip hardwire
at the prompt.
You should see the word
connected
as the response.
To disconnect the tip window, type
~.
(tilde period) at the prompt.
▼
To Use a PC Laptop
1. Get the appropriate cable(s) and adapter(s) and make the necessary connections.
You may need one or more cables and adapters in order to connect a PC laptop to
the server. The cables and adapters you need varies, depending on the model server
you have and the card that you are connecting to.
■
If you are connecting a PC laptop to a CPU or CPU transition card, use the
information in
TABLE 7-5
to make the necessary connections.
■
If you are connecting a PC laptop to an alarm card or alarm rear transition card, use
the information in
TABLE 7-6
to make the necessary connections.
tip -9600 /dev/ttya