Chapter 6
Cabling the System
89
2. Make the necessary cable connections to the CPU rear transition card.
Tighten the screws on the cable to a torque of 0.23 N.m (2 in.-lb).
FIGURE 6-31
shows the connectors on the CPU rear transition card for the Netra ct 800
server and
FIGURE 6-32
shows the connectors on the CPU rear transition card for the
Netra ct 400 server. The CPU rear transition card is the same for both the Netra ct
800 server and the Netra ct 400 server; only the location in the rear card cage differs.
FIGURE 6-31
Connectors on the CPU Rear Transition Card (Netra ct 800 Server)
SCSI
Ethernet B
Ethernet A
TTY B
TTY A
Parallel
(VHDC)
Summary of Contents for Netra ct
