Subaru 2013 Forester Owner'S Manual Download Page 282

Page: 282 / 529

Black plate (284,1)

一

般

Model "A8190GE-C" EDITED: 2013/ 3/ 29

5-30

Audio/Bluetooth

audio

Bluetooth

audio (if

equipped)

NOTE

The Bluetooth word mark and logo are
registered trademarks of Bluetooth
SIG, Inc.

This function enables you to play back
audio sources recorded in

Bluetooth

audio devices. You need to register the

Bluetooth

audio device in the system

before using it.

NOTE

The Bluetooth

audio function may

not operate properly under the follow-
ing conditions.

–

The device is turned off.

–

The battery of the device has run

down.

–

The device is not connected to

the system.

–

The device is behind the seat or

in the glove box.

–

A metal material is covering or

touching the device.

Depending on the type of device that

is used, operation and sound volume
may be different from normal use of
those devices.

The sound quality may degrade due

to the influence of the device that is
connected to the system or the circum-
stances of the Bluetooth network.

When another Bluetooth

device is

simultaneously connected, noise may
be heard.

Media format

Bluetooth

audio devices cannot be

connected if they are not compatible with
the following

Bluetooth

profiles.

A2DP (Advanced Audio Distribution

Profile)

AVRCP (Audio/Video Remote Control

Profile)

Setting Bluetooth

audio

NOTE

For models with multi function display,
Bluetooth

audio can be set via the

multi function display. For details, refer
to

“

“

”

button

1. Select the

“

BT-A SETUP

”

menu by

pressing the

“

”

button.

“

TUNE/TRACK

”

dial

2. Perform the following procedure by
operating the

“

TUNE/TRACK

”

dial while

“

BT-A

”

is displayed.

NOTE

You cannot set Bluetooth

audio while

driving.

Summary of Contents for 2013 Forester


















































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Forester

Reviews:

Related manuals for 2013 Forester

Brands by name

Popular brands

Subaru 2013 Forester, Owner'S Manual

Search results

Summary of Contents for 2013 Forester

Reviews:

Related manuals for 2013 Forester

Brands by name

Popular brands