Black plate (162,1)
一
般
Model "A8190GE-C" EDITED: 2013/ 3/ 29
3-32
Instruments and controls/Warning and indicator lights
NOTE
If this indicator light does not illuminate
even when you press the cruise control
main button, the cruise control system
may not operate properly. We recom-
mend that you have your vehicle
checked by your nearest SUBARU
dealer.
&
Cruise control set in-
dicator light (if
equipped)
This light illuminates when vehicle speed
has been set to use the cruise control
function.
&
Headlight indicator
light (if equipped)
This indicator light illuminates under the
following conditions.
.
when the light switch is turned to the
“
”
or
“ ”
position (except Australia
models)
.
When the light switch is in the
“ ”
or
“
”
position (Australia models)
.
when the light control switch is in the
“
AUTO
”
position and the headlights illumi-
nate automatically (models with auto on/
off headlights)
&
Front fog light indicator
light (if equipped)
This indicator light illuminates while the
front fog lights are illuminated.
&
Rear fog light indicator
light (if equipped)
This indicator light illuminates while the
rear fog light is illuminated.
&
X mode indicator light
(if equipped)
This light illuminates while the X mode is
activated. It will turn off when the X mode
is deactivated.
&
Hill descent control
indicator light (if
equipped)
This indicator illuminates while the hill
descent control function is in standby. It
will flash while the hill descent control
function is operating. It will turn off when
the hill descent control function is not
available.
&
Fuel filter warning light
(diesel engine models)
This warning light illuminates when the
amount of accumulated water in the fuel
filter has reached the specified level. If this
warning light illuminates, we recommend
that you have your vehicle checked at a
SUBARU dealer as soon as possible.
CAUTION
Never drive the vehicle when the
warning light is illuminated. Conti-
nuing to drive while water has
accumulated in the fuel filter will
damage the fuel injection pump.
&
Preheating indicator
light (diesel engine
models)
The preheating indicator light illuminates
when the ignition switch is turned to the
“
ON
”
position and turns off after the
engine has sufficiently preheated (a few
seconds later).
NOTE
.
When the weather is cold outside,
the preheating indicator light remains
illuminated a little longer than usual.
.
For models without push-button
start system, start the engine after the
preheating indicator light has turned
off.
Summary of Contents for 2013 Forester
