Subaru 2013 Forester, Owner'S Manual

Page: 231 / 529

Black plate (233,1)
一 般
Model "A8190GE-C" EDITED: 2013/ 3/ 29
NOTE
The windshield washer fluid warning
light illuminates when the washer fluid
level in the tank has dropped to the
lower limit. If the warning light illumi-
nates, refill the tank with fluid. For the
refilling procedure, refer to
“
Wind-
shield washer fluid
” F
11-38.
NOTE
If your vehicle is equipped with a
headlight washer, pulling the wiper
control lever for more than 1 second
also causes the headlight washer to
operate when the headlight switch is in
the
“ ”
position. For further details,
refer to
“
Headlight washer
” F
3-104.
&
Rear window wiper and
washer switch
1) Except Australia models
2) Australia models
: Washer (accompanied by wiper operation)
/ HI: Continuous
/ LO: Intermittent
/ OFF: Off
: Washer (accompanied by wiper operation)
!
Rear wiper
To turn the rear wiper on, turn the knob
switch upward.
To turn the wiper off, return the knob
switch to the
“ ”
/
“
OFF
”
position.
With the switch turned to the
“ ”
/
“
LO
”
position, the rear wiper will operate inter-
mittently at intervals corresponding to the
vehicle speed. In this position, when you
move the select lever to the
“
R
”
position
(CVT models) or the shift lever to the
reverse position (MT models), the rear
wiper will switch to continuous operation.
When you move the select lever/shift lever
from the
“
R
”
(reverse) position to another
position, the rear wiper will return to
intermittent operation.
NOTE
.
Even if the rear wiper switch is in the
off position, while the shift lever/select
lever is in the
“
R
”
position with the
windshield wiper operating continu-
ously, the rear wiper will operate inter-
mittently.
.
If a cargo carrier or other object that
disturbs rear wiper operation is at-
tached, the rear wipers may be da-
maged when they operate. In cases like
this, set the reverse gear interlocked
rear wiper to
“
non-operational
”
. For
more details, we recommend that you
contact a SUBARU dealer.
!
Washer
To wash the rear window while the rear
wiper is operating, turn the knob switch
upward to the
“ ”
position. The washer
fluid sprays until you release the knob.
To wash the rear window when the rear
Instruments and controls/Wiper and washer
3-103
–
CONTINUED
–
3