Subaru 2013 Forester, Owner'S Manual

Page: 167 / 529

Black plate (169,1)
一 般
Model "A8190GE-C" EDITED: 2013/ 3/ 29
!
Auto Start Stop time (models with
Auto Start Stop system)
1) Total time in conjunction with the trip
meter
2) Total time in conjunction with the ignition
switch
This display shows the total time that the
engine was stopped by the Auto Start
Stop system in the following ways.
Total time in conjunction with the trip
meter
: Displays the total time that the
engine was stopped by the Auto Start
Stop system, from the last time the
currently displayed trip meter was reset
until the current time. By pressing the trip
knob, you can toggle the display between
the time the engine was stopped for trip A
and the time the engine was stopped for
trip B.
Total time in conjunction with the
ignition switch
: Displays the total time
that the engine was stopped by the Auto
Start Stop system, from the time when the
ignition switch was turned to the
“
ON
”
position to the current time.
Perform the following operation to toggle
the display between the total time in
conjunction with the trip meter and the
total time in conjunction with the ignition
switch.
1. Press and hold the
“
+
”
button located
on the side of the information display. The
stopped time will then flash.
2. Within 5 seconds after the stopped
time starts flashing, press and hold the
“ − ”
button located on the side of the informa-
tion display. The display will then change
and after flashing for 3 seconds, the
stopped time selected will be displayed.
3. Each time the
“ − ”
button is pressed
and held during the 3 seconds that the
display is flashing, the display will change
and flash for 3 seconds. If the
“ − ”
button is
not pressed and held during the 3 second
period that the display is flashing, the
stopped time selected will be displayed.
!
X mode indicator (if
equipped)
This indicator will be shown while the X
mode is activated. It will turn off when the
X mode is deactivated.
!
Turn off display of driving informa-
tion display
The driving information display can be
turned off.
To turn off the display, turn the ignition
switch to the
“
LOCK
”
/
“
OFF
”
position and
press and hold the
“
+
”
button adjacent to
the clock. Then, the driving information
display and the clock will blink for 3
seconds to notify you that the driving
information display has been turned off.
To restore the display, once again press
and hold the
“
+
”
button.
Instruments and controls/Information display
3-39
–
CONTINUED
–
3