Subaru 2013 Forester, Owner'S Manual

Page: 479 / 529

Black plate (485,1)
一 般
Model "A8190GE-C" EDITED: 2013/ 3/ 29
7. Tighten the upper and lower screws.
&
License plate light
1. Insert a finger into the right side of the
license plate light cover, then press once
to the left and pull out to remove the cover.
2. Turn the bulb socket counterclockwise
and pull out the socket.
3. Pull the bulb out of the socket.
4. Install a new bulb.
5. Reinstall the bulb socket and the
license plate light cover.
&
Other bulbs
It may be difficult to replace the bulbs.
We recommend that you have the bulbs
replaced by your SUBARU dealer if
necessary.
Replacing battery
The access key / transmitter battery may
be discharged under the following condi-
tions.
.
The operation of the keyless access
function is unstable
.
The operating distance of the remote
keyless entry system is unstable
.
The transmitter does not operate prop-
erly when used within the standard dis-
tance
Replace the battery with a new one.
CAUTION
.
Do not let dust, oil or water get on
or in the access key/transmitter
when replacing battery.
.
Be careful not to damage the
printed circuit board in the ac-
cess key/transmitter when repla-
cing the battery.
.
Be careful not to allow children to
touch the battery and any re-
moved parts; children could
swallow them.
.
Danger of explosion if battery is
incorrectly replaced. Replace
only with the same or equivalent
Maintenance and service/Replacing battery
11-53
–
CONTINUED
–
11