Subaru 2013 Forester, Owner'S Manual

Page: 424 / 529

Black plate (430,1)
一 般
Model "A8190GE-C" EDITED: 2013/ 3/ 29
10-6
Appearance care/Cleaning the interior
spray lacquer. You will discover that each
leather seat section will develop soft folds
or wrinkles, which is characteristic of
genuine leather.
&
Synthetic leather upholstery
The synthetic leather material used on the
SUBARU may be cleaned using mild soap
or detergent and water, after first vacuum-
ing or brushing away loose dirt. Allow the
soap to soak in for a few minutes and wipe
off with a clean, damp cloth. Commercial
foam-type cleaners suitable for synthetic
leather materials may be used when
necessary.
CAUTION
Strong cleaning agents such as
solvents, paint thinners, window
cleaner or fuel must never be used
on leather or synthetic interior ma-
terials. Doing so could damage the
surface and cause the color to
deteriorate.
&
Climate control panel, audio
panel, instrument panel,
console panel, switches,
combination meter, and other
plastic surfaces
Use a soft, damp cloth to clean the climate
control panel, audio equipment, instru-
ment panel, center console, combination
meter panel, and switches.
CAUTION
.
Do not use organic solvents such
as paint thinners or fuel, or
strong cleaning agents that con-
tain those solvents. Doing so
could damage the surface and
cause the color to deteriorate.
.
Do not use chemical solvents
that contain silicone on the vehi-
cle audio system, electrical com-
ponents of the air-conditioner or
any switches. If silicone adheres
to these parts, it may cause
damage to electrical compo-
nents.
&
Monitor (if equipped)
To clean the navigation/multi function dis-
play monitor, wipe it with a silicone cloth or
with a soft cloth. If the monitor is extremely
dirty, clean it with a soft cloth moistened
with neutral detergent then carefully wipe
off any remaining detergent.
CAUTION
.
Do not spray neutral detergent
directly onto the monitor. Doing
so could damage the monitor
’
s
components.
.
Do not wipe the monitor with a
hard cloth. Doing so could
scratch the monitor.
.
Do not use cleaning fluid that
contains thinner, fuel, or any
other volatile substance. Such
cleaning fluid could erase the
lettering on the switches at the
bottom of the monitor.