Stulz ENS 14 A Technical Manual Download Page 52

Page: 52 / 110

DE / 06-2016 / 1000687

Installation

STULZ UltraSonic -System for duct humidification ENS 14 A - 18 A-

7.5.

Electrical connection

• The

operating voltage is 230 V, 50 Hz (control cabinet).

•

Connect the power supply cable to the terminal block of the control cabinet, i.e. L1 - N - PE.

7.5.1.

Connecting cables between the humidifier and control cabinet

The 2-meter pre-assembled cables are equipped with the appropriate connector. Insert the cables into

the sockets in the units and screw tight.

CAUTION

Danger of death. Electric shock risk.

There is an immediate danger of death from electric shock if live parts are touched.

The

STULZ

UltraSonic ENS ultrasonic humidifier may only be installed, connected and started up by

specialist electricians.

●

To change the settings of DIP switches or to remove the connections, always switch off the power

supply to the system and the unit, and secure so they cannot be switched back on for the duration

of the work.

WARNING

DANGER

CAUTION

Danger of death. Electric shock risk.

Never mount the control cabinet below the humidifier!

WARNING

DANGER

CAUTION

Electrical connections are secure.

After transport/delivery, check that electrical connections are secure and re-tighten if necessary.

WARNING

CAUTION

Position of control cabinet.

Install the control cabinet as close to the ultrasonic humidifier as possible, i.e. where - with adequate

ventilation - the temperature and humidity can be kept at a normal level.

WARNING

CAUTION

Position of control cabinet.

If extending connecting cables, take account of dimensions

("7.5.2. Cable dimensions" on page 51).

WARNING

CAUTION

Danger of death. Electric shock risk.

Faulty wiring of the switch gear cabinet can cause the humidifier to become defective.

The

STULZ

UltraSonic ENS ultrasonic humidifier may only be installed, connected and started up by

specialist electricians.

●

Switch gear cabinets must be wired as shown in the wiring diagrams provided.

WARNING

DANGER

Summary of Contents for ENS 14 A















































































































Search results

Summary of Contents for ENS 14 A

Reviews:

Related manuals for ENS 14 A

Brands by name

Popular brands

Stulz ENS 14 A, Technical Manual

Search results

Summary of Contents for ENS 14 A

Reviews:

Related manuals for ENS 14 A

Brands by name

Popular brands