Stulz ENS 14 A Technical Manual Download

Page: 35 / 110

DE / 06-2016 / 1000687

STULZ UltraSonic -System for duct humidification ENS 14 A - 18 A-

Installation

Installation

Please check that the product package is complete before installation

CAUTION

Danger of death. Electric shock risk.

Faulty wiring of the switch gear cabinet can cause the humidifier to become defective.

The

STULZ

UltraSonic ENS ultrasonic humidifier may only be installed, connected and started up by

specialist electricians.

●

Switch gear cabinets must be wired as shown in the wiring diagrams provided.

WARNING

DANGER

CAUTION

Genuine parts.

Use only genuine STULZ parts and genuine spare parts for installation.

CAUTION

Horizontal position.

The unit must be mounted precisely horizontally.

●

It is essential to check the position of the humidifier before starting it up!

IMPORTANT

CAUTION

Upright position.

Do not switch on the master switch under any circumstances if the unit is

not

in an upright position.

●

It is essential to check the position of the humidifier before starting it up!

IMPORTANT

CAUTION

Installation clearance.

Leave minimum clearance of longer than humidifier distance between the upper edge of the ultrasonic

humidifier.

●

See section

"7.2. Installation clearances" on page 33.

IMPORTANT

CAUTION

Frost protection.

Protect the entire system from frost.

IMPORTANT

CAUTION

Connection elements.

Only use connection elements of approved materials for installation.

Also see "4.7. Application limits" on page 18.

IMPORTANT

CAUTION

Fire/smoke detectors

Do not expose fire/smoke detectors installed in the room to aerosols, as this may trigger them.

Note

CAUTION

Only secure unit on one side.

Thermal stresses may arise during operation.

WARNING

Summary of Contents for ENS 14 A















































































































Search results

Summary of Contents for ENS 14 A

Reviews:

Related manuals for ENS 14 A

Brands by name

Popular brands

Stulz ENS 14 A, Technical Manual

Search results

Summary of Contents for ENS 14 A

Reviews:

Related manuals for ENS 14 A

Brands by name

Popular brands