© STULZ GmbH, Hamburg
DE / 06-2016 / 1000687
-
35
-
STULZ UltraSonic -System for duct humidification ENS 14 A - 18 A-
Installation
Proceed as follows to mount the ultrasonic humidifier in the duct:
1
Choose a suitable position for the ultra
-
sonic humidifier.
2
Affix the fastening elements of the chosen
mounting system in the duct using the
specified hole spacing.
3
a)
Bracket
Secure the humidifier to the wall bracket
with the M6 bolts.
b)
Safety tray
Install the humidifier in the safety tray.
Item Name
1
UltraSonic ENS 14 A - 18 A
2
Duct section of stainless steel
3
Supply air humidity sensor or hygrostat
4
Water drain (provide siphon)
5
Control cabinet USM/USS
6
Perforated plate for non-laminar incoming flow. Requirement: open diameter 60 %
7
Return air humidity sensor
4
7
3
4
1
2
6
5
CAUTION
Safety tray.
STULZ recommends the use of a safety tray along the entire humidifier distance.
Note
Summary of Contents for ENS 14 A
Page 4: ......