23
Figure 4: Additional Components - Startup Materials
The following items are not located within the Welcome Kit. Instead, they can be found within the oven chamber
and the storage drawer. The items found within the oven chamber must be removed before powering the printer
ON.
Key for Figure 4
1
Substrate (x16)
A substrate is the surface upon which a part is built. The same substrate is used for all model materials,
including PLA.
2
ABS Model
Material Spool
Material spool containing 60 in
3
(984 cc) of ABS model material.
3
QSR Support
Material Spool
Material spool containing 60 in
3
(984 cc) of QSR support material.
4
PLA Material
Spool
Material spool containing 60 in
3
(984 cc) of PLA material.
5
PLA Model Head Print head for use with PLA model material only.
6
PLA Cooling
Module
Cooling module to be used in conjunction with the PLA model head.
1
2-4
5
6
