Storz D-ACTOR 200 Operating Manual Download Page 5

Page: 5 / 74

19 620 02 0117

eface

Preface

Warning notes

This manual contains warnings, safety instructions and specific operating instructions

in accordance with liability regulations.
DANGER refers to a situation of acute danger which, if not avoided, could lead to
serious or fatal injury.

DANGER!

The source of the danger is stated here.

These are the possible consequences!

• The instructions for avoiding the danger are given here.

WARNING refers to a situation of potential danger which, if not avoided, could lead
to serious injury.

WARNING!

The source of the danger is stated here.

These are the possible consequences!

• The instructions for avoiding the danger are given here.

CAUTION indicates that incorrect operation could lead to minor injuries.

CAUTION!

The source of the danger is stated here.

These are the possible consequences!

• The instructions for avoiding the danger are given here.

ATTENTION indicates that incorrect operation could lead to damage to the device.

ATTENTION!

The source of the danger is stated here.

These are the possible consequences!

• The instructions for avoiding the danger are given here.

Other instructions

NOTE

Additional information concerning specific features or operating instructions is

preceded by the term 'NOTE'.

Summary of Contents for D-ACTOR 200











































































Search results

Summary of Contents for D-ACTOR 200

Reviews:

Related manuals for D-ACTOR 200

Brands by name

Popular brands

Storz D-ACTOR 200, Operating Manual

Search results

Summary of Contents for D-ACTOR 200

Reviews:

Related manuals for D-ACTOR 200

Brands by name

Popular brands