USER Manual
60
of
216
8.9.3
Scheduled dispensing group wash
If provided, the machine automatically requests that the dis-
pensing groups be washed on a daily basis.
To begin the wash cycle, proceed as shown on the display.
HOWEVER
you can also cancel the wash prompt and resume
normal operation.
8.9.4
Arbitrary dispensing group wash
During the washing phase, all the coffee selections
of that group are disabled.
Washes are interrupted if the machine is switched
off; to resume the washes automatically, turn the machine
on again.
If desired, it is possible to wash the groups at any time, pro-
ceeding as follows:
•
Select the
button.
•
Press the menu button
.
• Select the configuration button
.
•
Press the
Washes
button.
•
The display will indicate the date of the last wash cycle
and the number of wash cycles.
•
To start the wash, press the
Perform wash
button.
•
Insert a
suitable detergent in the blind filter holder, secure
it to the dispensing group and press the
Start
button.
• Wait for wash cycle to finish, then remove the filter holder
from the dispensing group and press the
Start
button.
• When the rinse cycle has finished, remove the filter holder
from the dispensing group and press the
End
button.
If it has been programmed, it is possible to per-
form a brief rinsing of the group (about 3 seconds)
by pressing the manual button or the START/STOP
button on the display.
If a certain number of cycles has been programmed
and such number is exceeded, the “Perform group
wash now?” message appears on the display. Pro-
ceed with washing following the instructions on the display.
USER MENU
Programme
doses
Time and date
Screensaver
Washes
Counters
Parameters
Blend
selection
Water filters
Beverage
graph
WASHES
WASHES
WASHES
WASHES
Groups
Perform a wash
Start
Start
End
Date of last wash
Insert the blind
filter with the
cleaner
End of wash.
Remove the blind
filter holder.
Wash
Completed
Number of wash cycles
Wash in progress
Rinse in progress
WASHES
WASHES
Summary of Contents for SAEP
Page 215: ......
