Page 18
Due to continuous product research and development,
the information contained herein is subject to change without notice.
www.stoddart.com.au
www.stoddart.co.nz
WASH
SYSTEM
INLET
STEAM
GENERATION
INLET
COLD WATER CONNECTION
WITH ISOLATION VALVE
(EXISTING CONNECTION)
OVEN
WASH
SYSTEM
OVEN
STEAM
GENERATION
A
J
I
I
F
F
D
D
D
H
C
B
E
G
G
K
2.5.4 Stoddart Standard Filter
IMPORTANT
This oven must be installed in accordance with AS/NZS 3500.1
The Oven must be installed with the supplied Dual Check Valve,
Water Filter and Pressure Limiting Valves
• Water connections are labelled on the oven
• Isolation valve must be installed at the water
supply outlet
• Water Temperature:
Cold water connection - Min 10°C, Max 35°C
• Steam Generation:
The Combi oven requires filtered water supplied
to its steam generation system. Water pressure
must be 150-350 kPa at oven connection. This is
controlled with the supplied PLV
• Wash System:
The Combi oven requires unfiltered water supplied
to its wash system.
Water pressure must be 150-350 kPa at oven
connection. This is controlled with the supplied
PLV
• Refer to the Stoddart Standard Filter user manual
for filter setup
Supplied Components
(Plumbing Kit / Water Filter Kit)
A. 1 x Stoddart Standard Filter
B. 1 x Dual Check Valve
C. 1 x 4 Way Manifold
D. 3 x 3/4” BSP To 3/8” Tube Connector
E. 1 x 1/2” BSP To 3/8” Tube Connector
F. 2 x 3/8” John Guest Stem Elbow
G. 2 x Pressure Limiting Valve
300-350
Kpa
H. 1 x Nipple, 3/4” Male
I. 1 x 3m 3/8 Tube (Water)
J. 12 x John Guest Locking Clip
K. Spare outlet
2.0 Installation
