Page 10
Due to continuous product research and development,
the information contained herein is subject to change without notice.
www.stoddart.com.au
www.stoddart.co.nz
2.2.4 Levelling 20/1GN, 20/2GN
• For improved safety and stability, the 20 tray oven can be fastened to the ground
• Remove the two screws that secure the rear foot to the frame
• Position the locking brackets and secure to the oven using the previously removed screws
• Attach the bracket foot to the locking bracket, let bracket foot sit on ground, then tighten
• Ensure that the oven is in the correct installation position, mark the hole locations of the bracket on the floor
• Move the oven forward, drill the marked holes (6mm hole) and insert a suitable fixing plug
• Push the oven back into position aligning the bracket with the drilled holes. Secure the bracket to the ground with fixing screws
Ø6
Spacer
2.0 Installation