Page 66
Due to continuous product research and development,
the information contained herein is subject to change without notice.
www.stoddart.com.au
www.stoddart.co.nz
PROBLEM
POSSIBLE SOLUTION
The oven does not start.
Check that the power supply is turned on
Make sure the oven door is properly closed
Make sure the parameters of the cooking cycle have been set correctly
Make sure the oven does not have any error messages displayed
If the problem persists, Contact the Stoddart service department
The fans stops during operation.
Turn off the oven and wait for the thermal breaker of the motor to be restored automatically
Make sure the cooling vents are not obstructed
If the problem persists, Contact the Stoddart service department
Internal lighting is not working
Contact the Stoddart service department
Water is not delivered from humidifier pipes
Check that the water shut-off valve is open
If the problem persists, Contact the Stoddart service department
In the event of severe failure, it is essential to turn isolate the unit from the power supply and close the water shut-off valve.
The door micro-switch is the device which stops the cooking cycle of the oven when the door is opened. Once the door is closed, the
regular cycle is resumed. Do not operate this device manually with the oven door open.
The fan motor is equipped with a built-in thermal protection which stops operation in case of overheating. The motor restarts automatically
as soon as its temperature is lowered, returning within the safety range.
If the temperature in the oven chamber reaches 350°C, the thermostat disconnects the power supply to the heating elements of the oven.
This safety device can be reset only by a qualified support service technician because it requires further checks.
5.0 Cleaning and Maintenance
5.6.1 Common Problems
5.6 Troubleshooting
5.6.2 Door Micro Switch
5.6.3 Motor Thermal Breaker
5.6.4 Safety Thermostat Of The Oven Chamber