15 SAFETY REGULATIONS
68
Mast reach
WARNING!
Before using the mast reach function, ensure that
neither yourself nor anyone else is at risk of being
crushed between the mast and the rest of the truck.
Clearance height
Bear in mind that the truck cannot be used where the clearance
height of an opening is less than the height of the drivers cab,
the load or the mast.
The truck in an industrial lift
The truck can only be driven into an industrial lift if this has
been authorised. Make sure that the capacity of the industrial lift
is never exceeded (the total weight of the truck including the
weight of the driver). The driver must be able to escape. Park
inside the lift so that the driver is beside the door. Never place
the truck or the load within the industrial lift's risk zones. Ensure
that the truck's brakes have been engaged before the industrial
lift is started!
Floor load
Carefully check notices or other instructions concerning the
maximum floor load or maximum wheel pressure to ensure that
these are not exceeded. For the truck's total weight, see the
machine plate.
Signalling
Use the signal horn to attract attention.
Reduced vision
Slow down when approaching crossings and other places
where the line of vision is reduced. Avoid driving in the same
direction as the forks if the load in front of you obstructs your
sight. Find someone to help you, if your vision is blocked.
In order to facilitate the work and to improve visibility from the
truck there are a rear view mirror and a camera system as
options.
NOTE!
Accessories on the truck may restrict the view.
Instruction Handbook UFW — D008453, B, GBR, ForTranslation
