Still FM-4W 20 Original Instructions Manual Download Page 17

Page: 17 / 85

DESCRIPTION OF THE TRUCK 07

NOTE!

If the truck is equipped with the wider fork spreading
unit, it projects 213 mm out on each side of the truck.

Settings

Instrument panel and arm rest

In order to increase comfort and driver ergonomics, there are a
number of adjustment options. For the operating procedures,
refer also to the instructions in the pocket under the right side
arm rest.

Figure 8. Adjustment of the dashboard and arm rest

Press button A to adjust the
complete dashboard forward
or back.

Move lever B upwards to
adjust the height of the arm
rest.

Driver seat

The driving seat can be adjusted to suit the driver's weight, size
and seating posture. The adjustments can be performed as
follows.

Instruction Handbook UFW — D008453, B, GBR, ForTranslation

Summary of Contents for FM-4W 20






















































































Search results

Summary of Contents for FM-4W 20

Reviews:

Related manuals for FM-4W 20

Brands by name

Popular brands

Still FM-4W 20, Original Instructions Manual

Search results

Summary of Contents for FM-4W 20

Reviews:

Related manuals for FM-4W 20

Brands by name

Popular brands