DRIVING INSTRUCTIONS 10
45
Starting the truck
1)
Connect the battery plug. Check that the emergency stop
function is disengaged.
2)
Ensure that no pedals / controls are affected.
3)
The fork lift truck is started in one of the following ways:
•
Code: Press
.
•
Key switch (option): Turn the key.
•
Smart card (option): Hold the card over the symbol
below the display where the card reader is
located, and then press "OK".
Press 1 2222
5682h
4)
NOTE!
The following steps (4, 5 and 6) only apply when
starting via the code ( ).
A request to state the operator identification will be
displayed. Enter your current user number. The truck is
delivered with the user number “1”. This should then be
changed so that each driver receives an unique user
number.
User ID:
?
5)
The text "Enter code" will now be displayed. Enter your
user password. The truck is delivered with the password
“2222”. This should then be changed so that each driver
receives an unique password.
Code:
????
6)
The truck is now ready for use.
Truck on C1
????
Driving instructions
1.
Start the truck in accordance with
Starting the truck
page
45.
2.
Keep your right hand beside the hydraulic levers and your
left foot on the foot rest (furthest to the left) so that the left
foot switch is depressed. Place your right foot on the brake
pedal (in the centre). Remember to keep your whole body
inside the truck perimeter to avoid crushing injuries.
3.
Check that the truck is in its transport mode (see
Transports
page 69).
Instruction Handbook UFW — D008453, B, GBR, ForTranslation
