DESCRIPTION OF THE TRUCK 07
21
situation, the S3-1 system immediately takes action by giving
new instructions to the control system for operation of the mast.
•
At high load heights, S3-1 limits the number of operations
that can be done at the same time. The speed of the
operations is also limited to further enable precise and safe
handling.
•
Simultaneous lever functions are permitted at low and
medium load heights, but even here the system
guarantees minimum abruptness and prevents undesirable
movements.
Stability Support System, S3-2
S3 alternative 2 (S3-2) is comprised of the sub-systems S3-2
speed and S3-2 weight.
S3-2 speed
The S3-2 is a system that measures the load weight during
and/or directly after lifting the forks, in order to obtain the
optimal braking effect and/or to permit higher speed for low load
weights. S3-2 permits higher performance than S3-1.
S3-2 weight
The S3-2 is a system that measures the load weight during
and/or directly after lifting the forks, in order to indicate the
weight to the operator, to allow for comparison with the truck's
load limits.
The load weight is rounded off to the nearest 100 kg.
NOTE!
The result of the weight measurement during lifting
can be affected if the oil temperature of the truck is
different from the oil temperature during weight
calibration.
Weight indication
Introduction
NOTE!
This system does not meet the legal requirements in
order to be valid as a scale.
If the weight indicator is activated, a load weight measurement
will start automatically after each time the load is lowered and
stop under the transport position switch.
NOTE!
Note that this occurs regardless of whether the
operator has requested measurement or not.
The operator can decide if the load weight is shown on the
display by pressing the button according
Current load weight
page 42. If no valid measurement reading is found at the time
of the measurement, the truck's computer will ask the operator
whether the forks are to be moved in order to get a reading –
this result will be shown on the display.
The load weight reading is rounded off to the nearest 10 kg/lb.
The minimum load weight is 100 kg/220 lb.
Instruction Handbook UFW — D008453, B, GBR, ForTranslation
