FR 131 T
English
31
N
Refit the flexible shaft (2) in the
protective tube (3) – turn it 180°
from the original installed position
and push it home as far as stop.
N
Push the flexible shaft fully into the
powerhead (4) – turn the shaft back
and forth at the same time.
N
Line up the flexible shaft – the word
"Top" must face up.
N
Insert the screw (1) with washer (2)
and tighten it down firmly.
For periods of 3 months or longer
N
Drain and clean the fuel tank in a
well ventilated area.
N
Dispose of fuel properly in
accordance with local
environmental requirements.
N
Run the engine until the carburetor
is dry – this helps prevent the
carburetor diaphragms sticking
together.
N
Remove, clean and inspect the
cutting attachment. Coat metal
cutting attachments with corrosion
inhibitor.
N
Thoroughly clean the machine.
N
Clean the air filter.
N
Store the machine in a dry and
secure location – out of the reach of
children and other unauthorized
persons.
N
Use a sharpening file (special
accessory) to sharpen dull cutting
attachments. In case of more
serious wear or nicks: Resharpen
with a grinder or have the work done
by a dealer – STIHL recommends a
STIHL servicing dealer.
N
Sharpen frequently, take away as
little metal as possible – two or three
strokes of the file are usually
enough.
N
Resharpen the teeth (1) uniformly –
do not alter the contour of the parent
blade (2) in any way.
See cutting attachment packaging for
additional sharpening instructions. Keep
the packaging for future reference.
2
3
0812BA037 KN
4
0000-GXX-1307-A0
0000-GXX-1308-A0
1
2
Storing the Machine
Sharpening Metal Cutting
Blades
002BA665 KN
1
2
2
1
2
2
1
2
1
1
Summary of Contents for FR 131 T
Page 1: ...STIHL FR 131 T Instruction Manual ...
Page 2: ......
Page 43: ......
Page 44: ...www stihl com 04584340121A 0458 434 0121 A 0458 434 0121 A englisch G ...