Stihl FR 131 T Instruction Manual Download Page 42

Page: 42 / 44

FR 131 T

English

Observe all country-specific waste

disposal rules and regulations.

STIHL products must not be thrown in

the garbage can. Take the product,

accessories and packaging to an

approved disposal site for environment-

friendly recycling.
Contact your STIHL servicing dealer for

the latest information on waste disposal.

ANDREAS STIHL AG & Co. KG

Badstr. 115

D-71336 Waiblingen
Germany
declares under our sole responsibility

that

conforms to the relevant provisions of

Directives 2011/65/EU, 2006/42/EC,

2014/30/EU and 2000/14/EC and has

been developed and manufactured in

compliance with the following standards

in the versions valid on the date of

production:
EN ISO 11806-2, EN 55012,

EN 61000

1 (in conjunction with the

following KombiTools: BF

KM, BG

KM,

FCB

KM, FCS

KM, FH

KM, FS

KM,

FSB

KM, HL

KM and HT

KM)

The basic power tool described here

may be operated only in conjunction with

the KombiTools approved by STIHL for

use with this specific basic power tool.
The measured and guaranteed sound

power levels were determined according

to Directive 2000/14/EC, Annex V, using

the ISO 10884 (FS) standard.
Measured sound power level:

Guaranteed sound power level:

Technical documents deposited at:
ANDREAS STIHL AG & Co. KG

Produktzulassung
The year of manufacture and serial

number are applied to the product.
Done at Waiblingen, 03.02.2020
ANDREAS STIHL AG & Co. KG
pp

Dr. Jürgen Hoffmann
Head of Product Data, Regulations and

Licensing

Disposal

000BA073 KN

EC Declaration of Conformity

Designation:

Brushcutter

backpack

Make:

STIHL

Series:

FR 131 T

Serial identification

number:

4180

Displacement:

36.3 cc

110 dB(A)

112 dB(A)

Summary of Contents for FR 131 T













































Search results

Summary of Contents for FR 131 T

Reviews:

Related manuals for FR 131 T

Brands by name

Popular brands

Stihl FR 131 T, Instruction Manual

Search results

Summary of Contents for FR 131 T

Reviews:

Related manuals for FR 131 T

Brands by name

Popular brands