Stihl FR 131 T, Instruction Manual

Page: 22 / 44

FR 131 T
English
20
Mount the cutting attachment the right
way round
Cutting attachments 1, 2, 3 and 4 may
be mounted either way round – they
must be turned over regularly to help
avoid one-sided wear.
The cutting edges of cutting
attachments 5 and 6 must point
clockwise.
Direction of rotation is indicated by an
arrow on the inside of the deflector.
N
Fit the thrust plate (9).
N
Place the cutting attachment (8) on
the thrust plate (9).
Collar (see arrow) must engage the
cutting attachment's mounting hole.
Securing the Cutting Attachment
N
Fit the rider plate (10).
N
Block the shaft (11) with the stop pin
(12).
N
Use the combination wrench (14) to
screw the mounting nut (13) on to
the output shaft counterclockwise
and tighten it down firmly.
WARNING
There is a risk of injury if the cutting
attachment works loose. If the mounting
nut has become too loose, fit a new one.
NOTICE
Remove the tool used to block the shaft.
Removing the Metal Cutting Attachment
WARNING
Wear protective gloves to reduce the
risk of direct contact with the sharp
cutting edges.
N
Block the shaft (11) with the stop pin
(12).
N
Unscrew the mounting nut (13)
clockwise.
N
Remove cutting attachment and its
mounting hardware from the
gearbox – but do not remove the
thrust plate (9).
681BA312 KN
1 2
3
4
5 6
8
9
10
11
13
14
0000-GXX-0502-A0
12