Stihl FR 131 T, Instruction Manual

Page: 26 / 44

FR 131 T
English
24
Controls
1 Throttle trigger lockout
2 Throttle trigger
3 Stop switch with Run and Stop
positions. Depress the stop switch
(
…
) to switch off the ignition – see
"Function of stop switch and ignition
system".
Function of stop switch and ignition
system
The ignition is switched off and the
engine stopped when the stop switch is
pressed. The stop switch returns
automatically to the Run position when it
is released: The ignition is switched on
again after the engine stops – the engine
is then ready to start.
Starting the Engine
N
Press the manual fuel pump
bulb (9) at least five times – even if
the bulb is already filled with fuel.
N
Press in the choke knob (8) and turn
it to the position that suits the engine
temperature:
The choke knob must engage in
position.
Cranking
N
Put the unit on the ground. Make
sure it is secure.
N
Keep the flexible shaft as straight as
possible.
WARNING
The throttle cable must be positioned
parallel to the flexible shaft, not wrapped
around it.
N
If fitted: Remove the transport guard
from the attachment.
Starting / Stopping the
Engine
2
1
3
0000-GXX-0477-A0
g
if the engine is cold
e
for warm start – also use this posi
-
tion if the engine has been running
but is still cold.
0000-GXX-0478-A0
0000-GXX-1303-A0