FR 131 T
English
19
Removing the Mounting Hardware
N
Block the shaft (5) with the stop pin
(1).
N
Use the combination wrench (2) to
loosen and remove the nut (3)
clockwise (left-hand thread).
N
Take the rider plate (4) off the
shaft (5). Do not remove the thrust
plate (6).
Mounting the Cutting Attachment
WARNING
Risk of injury from thrown objects and
contact with the cutting attachment. Use
a deflector that matches the cutting
attachment – see "Mounting the
Deflector".
Fitting Mowing Head with Screw
Mounting
Keep the instruction leaflet for the
mowing head in a safe place.
N
Fit the thrust plate (1).
N
Screw the mowing head (3)
counterclockwise on to the shaft (4)
as far as stop.
N
Block the shaft (4) with the stop pin
(2).
N
Tighten down the mowing head (3)
firmly.
NOTICE
Remove the tool used to block the shaft.
Remove the mowing head.
N
Block the shaft (4) with the stop pin
(2).
N
Unscrew and remove the mowing
head (3) clockwise.
Mounting Metal Cutting Attachments
Keep the leaflet and packaging of the
metal cutting attachment in a safe place.
WARNING
Wear protective gloves to reduce the
risk of direct contact with the sharp
cutting edges.
Mount only one metal cutting
attachment.
0000-GXX-1323-A0
4
1
2
3
5
6
1
0000-GXX-1324-A0
2
3
4
Summary of Contents for FR 131 T
Page 1: ...STIHL FR 131 T Instruction Manual ...
Page 2: ......
Page 43: ......
Page 44: ...www stihl com 04584340121A 0458 434 0121 A 0458 434 0121 A englisch G ...