FR 131 T
English
15
N
Place the clamp (3) in the loop
handle (4) and position them both
against the shaft (5).
N
Position the clamp (6) against the
shaft.
N
Place the barrier bar (2) in position
as shown.
N
Line up the holes.
N
Insert the screws (7) in the holes
and screw them into the barrier bar
as far as stop.
N
Go to "Securing the Loop Handle".
Leave the barrier bar permanently
mounted to the loop handle.
Mounting the Loop Handle without
Barrier Bar
N
Place the clamp (3) in the loop
handle (4) and position them both
against the shaft (5).
N
Position the clamp (6) against the
shaft.
N
Line up the holes.
N
Fit the washers (8) on the
screws (7), and insert the screws in
the holes.
N
Screw the square nuts (1) onto the
screws (7) as far as stop.
N
Go to "Securing the Loop Handle".
Securing the Loop Handle
N
Secure the loop handle (4)
about 20 cm/8 in (A) forward of the
control handle (9).
N
Line up the loop handle.
N
Tighten down the screws firmly –
lock the nuts if necessary.
7
7
6
3
4
2
5
265BA025 KN
266BA030 KN
1
3
4
5
6
7
8
1
8
7
4
0000-GXX-1301-A0
10
A
9
Summary of Contents for FR 131 T
Page 1: ...STIHL FR 131 T Instruction Manual ...
Page 2: ......
Page 43: ......
Page 44: ...www stihl com 04584340121A 0458 434 0121 A 0458 434 0121 A englisch G ...