29
Assembly of the solar collectors
All of the following screws to mount the collector can only be fixed after the installation of the hydraulic collector
connectors.
The previously inserted collector connection clamp „double“ should be moved until it stops at the collector. Then the
square head bolts could easily screwed with the u-disc and the nut M8.
Place the first collector. To do so, place it on the upper section
rail and drop it on the lowest one.
Be aware of not damaging the back panel by protruding
devices.
At the outside of the collector, the mounting plate
„onefold“ will be inserted and fixed directly at the profile
end (succintly).
1400020 Collector connection set profile edge
1400021 Collector fastening set profile