33
The cap will be mounted everywhere where a collector
connection is not used.
1310209 Cap set (2 pieces complete)
1310119 Cap set aluminium (2 pieces complete)
Air eliminator without extension
1310207 Air eliminator set without extension
(complete without cap)
Connection 3/4“
1310205 Collector connection set R3/4“
(2 pieces complete without cap)
Collector connections
Completely mounted air eliminator.
Any other connections as well as the cap will be assembled
in the same way. Make sure not to cover the capture for the
temperature sensor.
The imaged air eliminator is only suitable for the
application with copper pipes.
The required connection dimension für the mentioned collector
connections has to be calculated by the scheduler of the
installation depending on the regional circumstances (lengths
of the pipelines, additional resistors etc.)
The connection lines or lateral manifolds should be safeguarded
with a clamp in the region of the collector connections on the
warm and the cold side for a relaxation of the tension. This has
to be carried out by the customer.
Connection for soldering or clamping ring transition
1310204 Collector connection set 22 mm
(2 pieces complete without cap)
1310114 Collector connection set 22 mm aluminium
(2 pieces complete without cap)
The assembly of the hydraulic system depends on the delivery contents: hydraulic system Standard or hydraulic system
Smart Lock System.
