41
SnapCover
The assembly of the intermediate plates is absolutely necessary
when using the SnapCover.
After having assembled the intermediate plates, the assembly
starts at the lower left corner. An exact order of the assembly
including a labelling of the sheets will be descrieb on page 44.
Numbered sheets are included in the scope of delivery.
All SnapCover sheets will assembled in the same way. At
first, the plate will be hooked into the lower collector frame.
Afterwards, the fold of the sheet has to be clicked into the
recess of the cupper ollector frame.
There are three slight elevations at this fold which have to snap
into the frame and therefore secure the sheet against slipping
out.
After having assembled the eaves flashing, the first side plate
will be assembled at the same corner. This installation takes
place analogous to the assembly of the eaves flashing.
It is absolutely necessary to pay attention to the labelling of the
sheets and to the assembly sequence (sketch see page 44).
Move the eaves sheet and the side plate until there will be a
closed corner.
