20
Assembly roof-tile clamps for
corrugated sheet
Make sure that the clamps are placed near an existing
substructure.
The holes for the fixation screws have to be pre-drilled with an
8 mm borer.
The fixation of the clamps is realised with frontage screws
6,5 x 100 mm with sealing gasket.
Completely mounted roof clamp which is ready for the assembly
of the fastening profiles.
1410001 Roof-tile clamp corrugated V2
The screws contained in the set are suitable for roofs with a wooden substructure. In case of a metal substructure, the
fasteners have to be provided by the customer.
If the roof clamps cannot be mounted within the limits indicated (see „spacing roof hooks“), you have to mount horizontal
or vertical STI system profiles onto the roof clamp first of all. Afterwards the supplied fastening profiles can be mounted.
Depending on the width of the substructure underneath
the corrugated roof covering, the roof clamp can
additionally be fixed
with the second fastening screw.
