14
Assembly of the roof-tile clamps
Mounted screw as a distance saver.
If necessary, caulk the coarsely ground brick with a foam tape
as a protection against water.
In addition to the grinding of the roof-tiles we recommend using
a screw which will be mounted on the roof-tile clamp support
as a distance saver.
Fix the roof-tile clamp with the support of 50 x 150 x 5 mm
using two screws 5 x 60 mm.
Prior to roofing the covering tile has to be grounded coarsely.
Completely covered roof-tile clamp after covering.
Further roof-tile clamps in one row have to be adjusted exactly
(e. g. by a line mark).
