STG global TANVAC HDV3000, Operator'S Manual

Page: 7 / 329

4
4. NEVER operate the machine with any of the covers removed.
5. NEVER attempt any repairs to this machine. Always refer to your dealer.
6. NEVER supply any liquid other than water to the water inlet.
7. NEVER use the detergent pickup facility to introduce flammable liquids/solvents,
e.g. paint thinners, petrol, oil as there is a risk of explosion.
8. ALWAYS release any residual pressure in the system by turning off the water
supply and operating the trigger before disconnecting any hose or accessory.
9. ALWAYS keep the machine itself dry and well clear of water spray.
10. ALWAYS wear protective clothing and safety glasses. Loose particles and other
debris may be propelled at high speed by the water jet.
11. ALWAYS grip the gun firmly and expect the spray gun to ‘kick’ when starting.
12. ALWAYS respect the requirements of the local water company. Pressure washers
may only be connected to the mains drinking water supply if a system separator
(also known as a backflow preventer) is installed in the supply hose.
13.
ALWAYS
disconnect from the water supply, and ensure the system is completely
drained when not in use. Store in a cool dry location.
14. ONLY use chemical cleaning agents (detergents), that are approved for pressure
washers.
15. WARNING High pressure water jets can be dangerous if subject to misuse. The
jet must not be directed at a person or anything that they are wearing.
16. NEVER direct the jet at electrical equipment or the machine itself.
17. WARNING High pressure hoses, fittings and couplings are important for the
safety of the machine. Use only hoses, fittings and couplings recommended by
the manufacturer.
18.
WARNING
Water that has flowed through a system separator (also known as a
backflow preventer) is considered non-drinkable
19. NEVER use the pressure washer if the inlet/outlet hoses or important parts of the
machine are damaged.