STEYR MOTORS MO114K33, Operation, Maintenance And Warranty Manual

Page: 60 / 134

60
fullload
speedrange
100%
90%
80%
70%
60%
50%
40%
30%
B
C D
RPM
A
OUTPUT
POWER
Technical Data and Overview SE164E40, SE144E38
MAKE STEYR MOTORS
type
SE164E40 SE144E38
displacement 2133 cm³
piston displacement 85,0 x 94,0 mm
rated power acc. EN ISO 8665:2006
(impeller*) KW/HP
Jet – Drive/Inboard
Z – Drive
118/160
114,5/155.7
116,2/158
106/144
102,8/139.8
104,4/142
number of cylinders 4-cylinder in-line engine (position of cyl. 1 at vibration damper side)
ignition order 1 – 3 – 4 – 2
sense of rotation, seen from front right
compression ratio 17.0:1
propped speed range (rpm)
4000 rpm
(+100 rpm/–100 rpm)
3800 rpm
(+100 rpm/–100 rpm)
idle speed 750 rpm (adjustable)
injection Plunger activated, two stage, high pressure with electronically controlled
injection rate, timing
fuel EN 590
fuel filter 2203710-0
fuel filter location intake-sided
air filter refer to spare part catalogue
oil pressure above 2000 rpm 400 – 700 kPa (58 – 101 PSI) microprocessor controlled
filling capacity motor oil approx. 8,4 l engine housing (incl. approx. 1 l oil filter contents)
specification motor oil SAE 10W-40 ACEA E6/E7 API CI-4/CH-4/CG-4/CF-4,CF
P/No. Z050316-4
oil and oil filter change intervals**) according to service and maintenance schedule
oil filter refer to spare part catalogue
oil filter location pressure-sided
electric charging system 14 V/120 A alternator with transistorized voltage regulator
cooling system dual cooling circuit; thermostat-controlled, pressurized cooling circuit;
circulating pump with heat exchanger on engine; governor pump,
external raw water circuit to heat exchange
coolant capacity 9 liters
coolant STEYR MOTORS engine coolant –36 °C
P/No. Z011785/0v
*) Efficiency of gearbox = 97,0 %, efficiency of Z-Drive = 95,5 %
**) Extended periods to be evaluated upon application and type of usage STEYR MOTORS GmbH.
Reserves the right to make changes without notice or obligations.