STEYR MOTORS MO114K33, Operation, Maintenance And Warranty Manual

Page: 72 / 134

72
SE Service- and Maintenance Schedule
(703918_01) Series SE 4 Cylinder
(Z026168-0_08) Series SE 6 Cylinder
(only for fuel according to EN 590)
daily
after first
50 hours
or 6
months
every
300 h.
or 12
months
every
600 h.
or 24
months
notes
Unit Injector
check
-recalibrate levers
setting
● ●
-set point
● ●
-tightening torques
● ●
Hydraulic
Pump
check
-oil level
●
-for leakage
●
change -hydraulic oil (ATF)
●
every 900 hours or
every 24 months
Gearbox-
Sterndrive
check
-oil level
●
-for leakage
●
change
-gear oil (ATF)
see manufactur-
er’s specification
-oil filter
Torsional
Coupler
check -tightness of bolts every 48 months
change -bolts
if required, replace
bolts by using loc-
tite 243
Front Vibration
Damper
check -tightening torque
● ●
Engine
Compartment
and Bilge
check
-leakage water
●
repair or consult
your STEYR Ma-
rine Dealer
-leakage fuel
●
-leakage exhaust gas
●
Shifting
check
-smooth action
●
if required, to be
replaced by your
STEYR Marine
Dealer
-adjustment
●
Steering
Check
-lubrication
●
See Manufactur-
er’s specification
-oil level
●
Shaft Bearing
Gland
Check
-lubrication
●
Consult STEYR
Marine Dealer
-sealing
●
x
1
refer to manufacturer specification.
x
1
drain/clean water from separator bowl.
NOTE: Oil exchange interval must be adapted acc. application and utilisation of vehicle, respec-
tively quality of engine lubricant in use.