GENERAL
Page GENERAL-24
Z001019/0_7_January 2011
SERVICE MANUAL MARINE ENGINES
ToC
ENGINE
check
- for leakage
LUBRICATION
- oil level
change
- oil filter
- motor oil
ENGINE
check
- for leakage
COOLING
- fluid level
SYSTEM
- hoses, hose clamps
- antifreeze temperature condition
change
- antifreeze*)
every 24 month
RAW WATER
check
- hoses, hose clamps
SYSTEM
- zinc anodes
- raw water pump V-belt
- impeller
change
- raw water pump V-belt*)
if required
- impeller*)
if required
- zinc anodes*)
if corroded > 50%
preserve
- raw water circuit*)
after season
RAW WATER
check
- raw water passages*)
clean out desposits
COOLER
(OIL-FUEL-
in pipelines
AUX.LUBRICANT)
for 246 / 256
change
- zinc anodes*)
required if more
and 266 only
than 50% material
corroded
AIR
check
- contamination
FILTER
change
- air filter element
preserve
after season
FUEL
check
- for leakage
SYSTEM
- hoses
drain
- addtiional fuel filter
change
- fuel filter
check
- additional fuel filter
preserve
- fuel system*)
after season
BATTERY
check
- acid level
- densitiy
ELECTRONICS
check
- connections*)
after season
ELECTRICAL
check
- connections
tighten loose con-
EQUIPMENT
- insulation
nections. Renew
cables, if required.
INVERSION
check
- switch*)
every 50 hours
SWITCH (Solas only)
or every 6 months
DRIVING
re-center
- driving unit*)
see manufacturer's
SYSTEM
specifications
V-BELT
check
- generator & impeller pump
adjust tension
- power-steering
adjust tension
for all 6 cyl.
change
- generator*)
if required
m o d e l s
- power-steering*)
if required
POLY - V -
check
- belt, pulleys and tighteners
BELT
for wear
change
- Poly -V-belt
every 1050 hours or
for all 4 cyl.
every 48 months
models
after first
50 hours
or 6
months
*) notes
daily
every
150 h.
or 12
months
every
300 h.
or 24
months
C2 Service- and Maintenance Schedule
