01 ENGINE
Page ENGINE - 72
Z001019/0_6_July 2008
SERVICE MANUAL MARINE ENGINES
01.06.04
Replace oil pump
(front ring carrier)
Preparation:
dismantle engine housing, 01.06.01.
remove timing belt
remove vibration damper
1
Pull of timing belt sprocket by means of special tool
No. 2300636/0 (ill.1).
2
Loosen 6 hexagon screws (SW13) (ill.2), remove oil
pump housing.
ATTENTION:
Replace radial shaft sealing ring (ill.3/
pos.1) in oil pump housing. Mount oil
pump housing, and insert radial shaft
sealing ring with special tool No.
VR00118/0.
NOTE:
Check sealing ring (ill.3/pos.2) on oil
pump housing for damage; exchange
if necessary. (wet new sealing ring
with surface sealing agent
LOCTITE
5910
)
Apply
LOCTITE 509
to flange surface
to front main bearing block and oil
pump (front ring carrier)
Secure the 6 hexagon screws (ill.2)
with thread protection
LOCTITE 243
and tighten with a torque of
23 Nm +/-2
.
õ
06.04 ill.1
06.04 ill.2
06.04 ill.3
1
2
ToC
