GENERAL
Page GENERAL-34
Z001019/0_7_January 2011
SERVICE MANUAL MARINE ENGINES
ToC
E
QUALITY GUIDELINES FOR REPAIR
E 1
Spart part specification
Your STEYR marine engine was designed for marine operation which means operating
conditions such as:
* Long-time operation at high speed
* Operation in salt or brackish water
* Operation in very muddy water
Only use genuine STEYR MARINE spare parts in order to avoid possible loss of performance. For this
reason you should insist on the famous quality of genuine STEYR MARINE spare parts and under no
circumstances use spare parts of unknown quality.
E 2
Workshop profile
Independently of the respective repair steps and the legal regulations the workshops have to meet the
following requirements:
-
Clean, dry, and dustfree environment
-
Lifting gear (crane) with a lifting capacity of 5 000 N (500 kg) minimum
-
Cleaning device (wash basin) for soiled components
-
Commercial tools
-
Appropriate test and measuring equipment
-
Receptacles for operating agents.
Depending on the repair step to be carried out, the tools indicated in the catalog TOOL KIT are to be
provided.
Furthermore special care is to be taken in case of purchasing and stock of required operating material,
spare parts and wear parts (e.g. seals, filters, anodes,...).
For appointed retailers and authorized workshops of STEYR MOTORS GmbH, the following
minimum standard is to be met:
-
basic training (as soon as possible, after conclusion of contract, for trade and workshop)
-
biannual training (reacurring)
-
tool kit I (service and maintenance tools)
-
tool kit II - III (depending on repair to be carried out)
-
procurement and stock of required genuine spare parts (as per proposed spare parts)
-
spare part catalogue for all STEYR MARINE ENGINES models
-
technical literature
-
PC diagnostics
