© 2008 Stevens AeroModel.
Page 22 of 52
4.
Slide the 0.045 in. wire push rods through the push rod housing and capture “L” bend with one each Du-Bro
Micro II EZ Link as illustrated below. Note both parts are provided in your DUB922 pushrod kit. We suggest
you read and execute the recommendations on the plan set for “Preventing In-Flight Failure of Worn EZ Link”.
5.
Center the control surfaces and mount and center Rudder and Elevator control servos as illustrated in the plan
set. Follow the instructions provided on the DuBro Pushrod kit for making final connections of push rod to servo
control arm. Trim the push rods to overhang no more than ½ in. beyond the servo control arm.